Learn about our Rubber Track Undercarriage

Rubber Track Undercarriage has its special advatanges. If you compare it with a steel track, the use of rubber track shoes can reduce the damage to the road. Low noise is also an advantage. If the equipment is operating in a crowded area, rubber track shoes produce less noise than steel tracks. In addition, the speed of the rubber track shoes is also very high when running, because the rubber track shoes allow the machine to travel at a higher speed, and if the steel track is used, it is slower when walking. These are some of the more obvious advantages of this product.

Besides these, there are many advantages of rubber track shoes. For example, it has less vibration, because the rubber track shoe has a better shock absorption effect, so that it can prolong the life of the machine and reduce operating fatigue when it is used. So it has more advantages compared to the previous steel track. This is the main reason why it is popular in the market. Many users will choose it to apply after knowing this.

K-Long Machinery is specialized in the tracked undercarriage, have advantages in the quality, price and after-sales service. If you have the needs, please feel free to contact us.

We have Rubber Tracked Undercarriage series from 0.5tons to 10tons, below are for your referance, we also would like to customize as your requests.

The following points should be paid attention to when using the rubber track chassis:

(1) The operating temperature of the rubber track in the rubber track chassis is generally between -25 and +55°C, so try to avoid failures in bad weather;

(2) The salt of chemical, oil and sea water will accelerate the aging of the rubber track chassis track. In this case, the track should be cleaned in time after use;

(3) The road surface with sharp protrusions (such as steel bars, stones, etc.) will damage the rubber track, so special attention should be paid when using it;

(4) The curbs, ruts or uneven road surface of the road will cause cracks in the ground side pattern of the track edge of the rubber track chassis, which can continue to be used when the cracks do not damage the steel cord. Otherwise, the track needs to be replaced;

(5) Gravel and gravel roads will cause early wear and tear on the rubber surface of the load-bearing wheel, forming small cracks. In severe cases, moisture intrusion will cause the core iron to fall off and the steel wire to break. Therefore, attention should be paid to regular maintenance and inspection of the rubber track chassis;

(6) When choosing the rubber track chassis, you should also pay attention to other accessories, especially the key parts such as engine, gearbox, tires, etc., should not be treated carelessly.